The Sports Car

The Sports Car

Pinewood Derby Times
Volume 5, Issue 4
November 16, 2005

In this Edition:

- Editor's Notes

- Feature Article - Axle Installation Made Easy

- Newsletter Subscriber Specials

- Car Showcase

- Memory - Late Start

- Q&A




Editor's Notes

New Products
With the majority of pinewood derby races occurring in the next few months, we are introducing four new products to help you reach maximum velocity:

  • Pro-Axle Guide - This new tool from Derby Worx ensures accurate axle mounting in slotted blocks, and serves as a gap gauge for kits with axle slots or axle holes. As an added bonus, the tool provides support to the wood around the axle slot, minimizing the risk of damage during axle insertion. You can read more about the Pro-Axle Guide in the feature article, or you can Click Here.

    To thank you for your continued readership, we are offering the Pro-Axle Guide at a special price. Click Here to find out more.


  • MV Basic Car Kits - We now offer a basic car kit for use in your organization's pinewood derby race. These kits have a quality, BSA-like block, 4 PineCar Wheels, and include our Speed Axles (no burrs or crimp marks). These are a great replacement for PineCar or Awana kits. A discount is offered when the kits are purchased by the dozen. To find out more, Click Here.


  • Super Speed Axles - These after market axles are formed to resemble BSA axles (including a point), but with a slightly tapered head, no burrs and crimps marks, and a grooved shaft to minimize wheel-axle contact. With a nickel plating, these axles are ready to enhance performance when used with BSA, PineCar, and other wheels. For more information Click Here.
To see all of our new products for 2005-06, Click Here.


Reader Feedback
I received the following comment from Richard Sanner regarding the article entitled "The Dark Side: eBay Cars":

"The other 'dark side' I have ran across in scrounging around the Internet for pinewood ideas that surprised me a little (but shouldn't have) is web sites that have a front end designed to show up under searches for 'pinewood cars' or 'pinewood derby', etc., but have a back end containing what is euphemistically called 'objectionable material'. If you haven't offered a caution regarding this issue to your readers, it might be an idea to consider. Fortunately my Internet access has filters to block this material and alert me to site contents before I enter. But some of the home computers a young person might use to find some "fun tips" to improve their car might not."


Back Issues
Are you a new subscriber? Have you missed a few issues? You can start reading all of the back issues of the Pinewood Derby Times today by Clicking Here.


Questions
If you have any questions about the Pinewood Derby Times, Maximum Velocity, or about building a pinewood derby car, please contact me at: info@maximum-velocity.com


P311 - Stinger


P319 - Formula
Product Giveaway
I picked up a small quantity of two PineCar dry transfer decal sheets that I don't normally carry.

You can have one of these decal sheets absolutely free simply by including the name of the item you want in the comment section of the order form for any shippable order (excludes orders containing only Immediate Download booklets). This offer will continue as long as our stock lasts.



Our new car plan booklet, Car Plans 4, has three fast car designs that are easy to build. Get plans for the Sports Car, the Truck, and the Dune Buggy. Click Here for more information


Feature Article

Axle Installation Made Easy

Mounting axles in blocks with slots has always been problematic. Problems include damage to the car body, sore thumbs, non-symmetrical insertion (some axles angled, others not), bent axles, and uneven car-to-wheel gapping. I believe there is an easier way, so today's article will provide a game plan for both simplifying axle insertion and improving accuracy.

AXLE SLOT/HOLE PREPARATION

Whether your block is equipped with axle slots or axle holes, preparation is necessary to simplify and ensure proper axle installation. This preparation should occur before any other work is done on the wood block.

Axle Slots

In order to firmly hold the axles, axle slots are typically cut narrower than the diameter of the axle. While this tightness is necessary, it increases the difficulty of installing the axles. So, to make the axles go in easier - and to minimize the risk of damaging the block or bending an axle - the slot must be accurately widened just a bit. This can be done in one of two ways:

  1. Axle Method - One way to widen the slot is to use a hammer to tap a spare axle into the slot, pull it out with a pair of pliers, and then repeat for the other three positions. While this will work, it is not particularly accurate and can lead to block damage.


  2. Pro-Body Tool Method - The preferred method to widen the slot is to use a Pro-Body Tool.1 The Pro-Body Tool is a drilling guide, with which a drill bit is used to accurately widen the slot. It will also compensate for slots that are slightly out of square. To get a better idea as to how the Pro-Body Tool works, Click Here.
Axle Holes

Similar to axle slots, in order to firmly hold the axles in place, axle holes are generally drilled smaller than the diameter of the axle. In addition, pine tends to 'relax' after it is drilled, so the final hole will tend to be slightly smaller than the drill bit. To open up the hole, tap a spare axle into the hold, pull it out with a pair of pliers, and repeat for the other three positions.

WHEEL/AXLE PREPARATION

Before installing the wheels and axles, complete all axle and wheel preparation steps. Then lubricate the wheels/axles while they are off the car. If you are unsure as to these preparation steps, they are covered in back issues of this newsletter, as well as in our booklet, "Speed to the Finish".2

AXLE INSERTION

Axles can be inserted by a variety of methods including pressing them in by hand, or pressing them in place with a vise or clamp. Regardless of the method, the gap must then be set between the car body and the wheel hub. The PineCar alignment tool can be used for setting this gap, or you can use a dime.

While these methods work, I would like to introduce you to a new method of axle installation using a tool called the Pro-Axle Guide.3

The Pro-Axle Guide is a tool to help insert axles with accuracy. The tool is equipped with a ridge to keep the axle at the correct depth in the slot, and is also equipped with a gauge for setting the proper gap between the car body and the wheel hub (see Figure 1).

Figure 1
Pro-Axle Guide Components

The Pro-Axle Guide can be used for inserting axles in either slots or holes. When inserting axles into slots, the tool's ridge fits in the axle slot. When inserting axles into holes, the flat side of the tool is placed against the bottom of the car. In either case, to use the Pro-Axle Guide follow these steps:

  1. Partially insert the axle into the slot/hole, and then place the tool on the bottom of the block with the gauge between the wheel and the car body.


    Figure 2
    Preparing to Insert an Axle

  2. Next place the axle head on a hard surface, such as a workbench or desk. While firmly squeezing the tool to the block, press down on the axle head. Continue pressing until the wheel hub rests against the gauge.


    Figure 3
    Pressing the Axle into Place

  3. For non-BSA wheels, the axle will need to be inserted a bit further. This can be done by pressing the axle head with a thumb or the handle of a small screwdriver.


  4. Remove the tool and repeat for the other axles.
AXLE ALIGNMENT

Now that the wheels/axles are installed, but before they are permanently affixed, test and adjust the alignment of the car. To accomplish this, you may need to remove and reinstall the axles. If so, then repeat the process described in the previous step. If you are unsure as to how to align the car, there will be an article on alignment in a future newsletter, or you can find two documented procedures in our "Speed to the Finish" booklet.

SECURING THE AXLES

Finally, the axles must be secured in place. The method is different for axles slots versus axle holes.

Axle Slots

Axles can be affixed in axle slots with some white (Elmer's) glue. Other glues can also be used, but I prefer white glue because:

To glue the axles, lay the car on soft rag with the bottom facing upwards. Place a dab of white glue in the slot area between the axle tips. Spread the glue over the top of the axles, but keep it away from the wheels. Remove excess glue with a rag, and then don't move the car until the glue is dry.

Axle Holes

If axles are quite tight in the axle holes, then it is not necessary to glue them in place. But if your axles are not tight, or if you choose to glue the axles anyway, here is the procedure:

  1. Remove an axle,


  2. Put a small drop of white glue on a toothpick,


  3. Insert the toothpick into an axle hole and swish it around,


  4. Remove the toothpick, wipe off any glue on the side of the car, and


  5. Reinstall the axle.
Again, I prefer white glue for the same reasons listed above.

CONCLUSION

Proper axle installation is extremely important to reach maximum velocity. I hope that you find the information in this article to be helpful, and that you have a successful race this year.

1The Pro-Body Tool can be found by Clicking Here.

2"Speed to the Finish" can be found by Clicking Here.

3The Pro-Axle Guide is the newsletter special, or it can be found by Clicking Here.




Special Offer for Newsletter Subscribers

Pro-Axle Guide - $1.00 off


Here is your chance to get the latest tool from Derby Worx at a great price! The Pro-Axle Guide ensures accurate axle mounting in slotted blocks, and serves as a gap gauge for kits with axle slots or axle holes. As an added bonus, the tool provides support to the wood around the axle slot, minimizing the risk of damage during axle insertion.

For more information, on the Pro-Axle Guide,
Click Here.

but make sure to Purchase Here.

These specials are valid through November 29, 2005.



Car Showcase

Soccer: Mike Parrish


Here is my daughter's last official Awana entry. She will be too old to race in the Awana competition next year. She did everything on this car except truing the wheels, molding the lead and cutting the block on the band saw. We had a great time building this one. She actually would come up and tell me it was time to go down to the basement and work on it. She got 1st Place for speed and 1st Place for original design. It was a great way to end our competition (onto the open classes). She loves to play soccer, but will miss one game as the state Grand Prix is on the same day.


Cheese Block & Surf Board: Daniel Nagel


Here is a picture of the cars my son and I did a few years back for one of our Royal Ranger derbies. We both decided that we were getting tired of making the same type of cars and went with these different cars. The cheese block was my car and the surf board was my son's idea. He was a little young at the time so I had to help him implement the idea. Back then we raced at 6 ounces instead of 5 like we do now. You wouldn't believe how hard it was to get 6 ounces in that thin little surf board - there's more lead than wood!


Zack's Car: Dwight Endersbe


Here is a picture of my grandson's (Zack) 1st Place winner (den, pack, and district). We raced on a 45 foot aluminum track, with MPH used to determine the winners. We did it in 8.243 MPH. Zack is a first year Webelo, so we have two more cars to make.


Share Your Pinewood Derby Car Creation
Do you have a car you would like to 'show off' to our readers? If so, send us a photo of your car along with a brief description of any special features. Please include your name, city and state. If selected, we will include the photo and description in this Car Showcase section. Please e-mail photos to:
info@maximum-velocity.com.

Photos must be sent by e-mail in JPG format (minimum size of 640x480 - maximum size of 1280 x 960). Please shoot photos from the front left of the car, similar to the orientation of the cars shown above.

Send only one photo per car, unless an additional photo is needed to adequately show a feature. Also, only one car per subscriber please. Thanks!



Pinewood Derby Memory

Late Start

Our son started his Cub Scouting career late, so he didn't do his first pinewood derby until he was a Bear. Remembering the one pathetic race I participated in when I was a Cub, I did lots of research into the 'tricks of the trade'. I learned about matching the wheels, sanding and polishing, axle positioning, weight distribution, etc. I also looked for car designs and templates, printed these, and let my son choose his car.

We spent the next month putting all of these lessons learned into effect. There was much cutting, sanding, polishing, sanding, polishing, and then more sanding. We got down to a week before the big race, and it was time to paint. With our son being a big Harry Potter fan, he wanted a 'Snitch' car, so we painted the car a metallic gold. Mom then got in on the act and hand-painted wings on the side, a lightning bolt on the nose, and the 'HP' logo on the rear end of the top. A trip to the Post Office revealed I was still light on weight, so I added one flat piece of weight to the end, painted it with the gold, and we were set.

Our son is highly competitive, so we spent the morning of the race talking with him about being a good sport regardless of the results. His best friend was the two-time defending Pack Champion, so we thought we'd have a hard time placing, and wanted our boy to be emotionally prepared. Turns out we were wasting our breath.

The first heat our son was in, he got himself positioned right at the end of the track. As the cars left the starting gate, it was clear we'd done something right. His car had a two car-length lead coming out of the curve, and extended it on the flat. He was absolutely ecstatic as his car won his first ever race. On his second heat, with his friend in an adjacent lane, he 'took the flag' by two car-lengths. He faced a real challenge in the third heat, coming off the curve half a car-length behind. However, he shot past all the cars on the flat to win by a full length. End result - Den and Pack Champion, with a big trophy to prove it!!! I'm glad I had the DVD camera to capture all of the excitement.

The District race was held a month later. In the Bear rank preliminaries, our son took third out of 45 participants, qualifying for the District finals. There was a significant break between our rank qualifying and the finals, so I took the car and we went to lunch. It was at this point I probably made a mistake. During the lunch break I added more graphite to the wheels and axles. While I spun them in, I'm still wondering if it was a mistake. In the finals, we never came close. We ended up finishing ninth out of 15 in the finals. Disappointing for our son, but not bad for a first-ever racer.

John Nelson
Sterling, VA


Do You Have a Pinewood Derby Memory to Share?

Now that many races have been completed, I am sure there are many stories to share. Please jot down your humorous, unusual, sad, or heart-warming pinewood derby tale and send it to:
info@maximum-velocity.com

If your story is used, you will receive a free copy of Volume 5 of the Pinewood Derby Times when it is compiled during the summer.

Don't worry about literary polish. We will edit as needed, and review it with you before publishing. Also, please read our Submission Policy




Q&A

I understand the reason to run with one wheel off of the track but which wheel should you raise?

I recommend lifting a front wheel and offsetting the added weight towards the rear of the car. Left or right doesn't really matter, but I always lift the left-front wheel (probably because I am right-handed!).


Our pack is considering buying a new track to host the District races. We're thinking about an aluminum track with at least 6 lanes. But, we see there are several lengths of tracks available. We run in a school gym, and that gives us plenty of room. Is there a large difference in performance/speed between tracks that are 32', 40' or 48'? Does one length favor a certain type of car over another length? Would you expect cars that work well on a Pack's wood track to do equally well on an aluminum track?

Here are some Pros and Cons of longer tracks

Pros

  1. Longer tracks provide more room for spectators.


  2. Longer tracks make the races a bit longer which may be more interesting.
Cons

  1. Longer tracks are more expensive.


  2. Longer tracks take more space to store, and a little longer to set up accurately.


  3. Longer tracks result in more cars failing to reach the finish line (probably won't happen at the district level).


  4. Longer tracks can lengthen the overall event as it takes longer to retrieve cars.
The performance difference is in the order of a few tenths of a second per every 8 additional feet.

Assuming that the tracks being compared have the same geometry (slope followed by a long flat), the shorter tracks (under 40) strongly favor a rear weighted car. As the track lengthens, best results are obtained by adjusting the balance point forward in proportion to the track length.

If you have a 32 foot track at the pack race, and then a 48 foot or longer track at the districts, you may get different results (i.e., the finishers from a particular pack may finish in a different order). There could be fairness issues if some packs impound cars and other packs don't. The people that have access to their car between the events could adjust the weight position slightly to optimize for the longer track.


We are thinking of using a Body Skin for our car. If we apply a Body Skin can we then apply dry transfer decals over the Body Skin, or will there be adhesion problems?

Dry transfer decals can be applied to the Body Skins. Just make sure the Body Skin is fully dry before applying the decal.


Do you have a pinewood derby-related question? If so, send your question to:
info@maximum-velocity.com. We answer all questions by e-mail, but not every question will appear in the Q&A section of the newsletter.



Back Issues

Are you a new subscriber, or have you missed some of the previous newsletters? Don't miss out! All of the issues for Volume 5 are posted on our web site:

  1. Volume 5, Issue 1


  2. Volume 5, Issue 2


  3. Volume 5, Issue 3


  4. Volume 5, Issue 4
Issues from the four previous seasons are available in four formatted volumes, ready for immediate download. To find out more, Click Here.





Newsletter Contributions

We welcome your contributions! If you would like to contribute an article, a web site review, or a speed tip, please send it to: info@maximum-velocity.com.

Please read our submission policy.




Subscription Information

The Pinewood Derby Times is a free e-newsletter focused on the Pinewood Derby. It is published biweekly from October through April.

Please Forward This Issue to a Friend

If you haven't already done so, feel free to forward this issue to your pinewood derby friends. Thanks!

Sign Up

If this newsletter was forwarded to you, why not subscribe to receive this newsletter. It is absolutely FREE and your e-mail address is safe, as we never release our distribution list.

Please don't subscribe your friends. Let them decide for themselves. Thanks.

To subscribe, enter your e-mail address below and press 'Subscribe'. You will be sent a confirmation e-mail. Reply to the e-mail to complete the subscription.

Type Your E-mail Address




Randy Davis, Editor, Pinewood Derby Times
E-Mail: info@maximum-velocity.com


Copyright 2005, Randy Davis. All rights reserved. Please do not reprint or place this newsletter on your web site without explicit permission. However, if you like this newsletter we grant permission, and encourage you to e-mail it to a friend.

The author disclaims any personal loss or liability caused by utilization of any information presented in this newsletter.

The Pinewood Derby Times is not specific to, and is not affiliated with the Boy Scouts, YMCA, Awana, or any other organization.


® Maximum Velocity! is a registered trademark of Maximum Velocity! Pinewood Derby Products.
Pinewood Derby, and Space Derby are registered trademarks of Boys Scouts of America. All other names are trademarks of their respective owners.

Mailing list services are provided by: www.mail-list.com