Pine Block – Standard Axle Holes

$3.95

A high quality pine block for your shaping pleasure! The block is equipped with precision-drilled axle holes at the standard BSA position.

Description

**IMPORTANT – Read Before Ordering**

  • Wheels and axles are not included with the blocks.
  • If you need the block to have four wheels on the ground, or plan to use Awana axles, then in addition to the block you will need to add a standard option to the shopping cart.

Benefits

You will get top performance from these blocks!

  • Precision Axle Holes – The axle holes are precision drilled to improve alignment and speed.
  • Raised Axle Hole – The front-left axle hole is drilled slightly higher so that the car runs on three-wheels. Tests consistently prove that three-wheel cars are faster than four-wheel cars.

Specifications

The block measures:

Height: 1-1/4″
Width: 1-3/4″
Length: 7″

The block is equipped with precision-drilled axle holes at the standard BSA position, and are drilled with a #44 bit (fits BSA axles). One front axle hole is slightly raised so that the car will ride on three wheels (best performance).

Options

The following standard options are available:

  1. Option 9000: Drilled axle holes, 4 wheels on the ground – add $1.00.
  2. Option 9002: Drilled axle holes for Awana axles (3/32″ bit) – add $1.00.
  3. Option 9003: Wedge Cut Block – add $2.00.
  4. Option 9004: Block Sliced Per Customer – add $2.00.

A high quality pine block for your shaping pleasure! The block is equipped with precision-drilled axle holes at the standard BSA position.

From Randy:
“We use a precision drill press to ensure that axle holes are drilled as accurately as possible. This minimizes alignment issues, simplifying the building of a fast car.”

Additional information

Weight 4 oz