Extended Interceptor Pinewood Derby Car Design

MAXIMUM VELOCITY!^®

Extended Interceptor
Pinewood Derby Car Design

THE INTERCEPTOR lives up to its name. Not only does it look fast, but proves it on the track.

In addition to the car kit and basic hand tools, you will need the following supplies to build THE INTERCEPTOR:

1/2" Brad Point or Forstner drill bit (hardware store item)
Coping saw and Hacksaw blade
Flat File and Shoe Rasp (Hardware store item)
Wood chisel (1/2" or smaller)
3-3/4 ounces of segmented lead weight with adhesive removed. These plans assume that each segment is 1/4 ounce and measures 1/2" x 1/2" x 1/8".
Drag Racer and Custom Designs decal sheets were used to customize the car in the photo
The extended wheel base can be created by either cutting new axle slots with two hacksaw blades, or by drilling axle holes with the Pro-Body Tool. Instructions and templates are provided in the Advanced Car Plans booklet.

Customer Submitted Photos of the Interceptor

Nick and Kyle Marinelli - 2002 Roland Kuhn - 2002 Les Charles - 2003 Chris Booth - 2004
Chuck & Andrew Jakab - 2004 The Booths - 2006

Copyright © 2012 by Maximum Velocity, Inc.
Ž Maximum Velocity! is a registered trademark of Maximum Velocity, Inc.
Awana is a registered trademark of Awana Clubs International
Pinewood Derby is a registered trademark of Boy Scouts of America