Pinewood Derby Car Underglow Lights

$9.95

Make your pinewood derby car stand out from the crowd with Underglow Lights.

These LED lights stick to the bottom of the pinewood derby car and give your car some real flair.

The Underglow Lights have four settings which are selected by repeatedly pressing the button on the control module:  off, fast-flash, slow-flash, and on.

Description

Make your pinewood derby car stand out from the crowd with Underglow Lights!  These LED lights stick to the bottom of the pinewood derby car and give your car some real flair.

The Underglow Lights have four settings which are selected by repeatedly pressing the button on the control module:  off, fast-flash, slow-flash, and on.  See the video below for a demonstration.

 

Pinewood derby car Underglow Lights have a plastic shield to protect them in the braking section of the track.  The battery/control module is recessed into the bottom of the car.

pinewood derby car lights bottom view

Figure 1 – Module recessed into car.  Hole be made round or square. Module is equipped with a rubber sheath – removed in this photo for visibility

pinewood derby car underglow lights on

Figure 2 – Lights On

Specifications

Weight – 0.24 ounce

Battery – CR2032 (one included)

Q&A

Are Underglow Lights legal in my race?

Underglow Lights are a BSA-branded product, so they should be considered legal in BSA races.  The lights are considered as an “accessory”, and in virtually all races accessories are allowed as long as they are affixed (not loose) to the car.

Will Underglow Lights cause the car to fail the 3/8 inch clearance test?

No, the Underglow Lights are 1/16 inch thick, so the car will pass the 3/8 inch clearance test – unless axle holes have been drilled very high on the car.

Can the battery be replaced?

Yes, the battery can be replaced.

How are the Underglow Lights installed?

Full installation instructions are included with the Underglow Lights.

 

Additional information

Weight1 oz