Pinewood Derby Car Showcase – June 11, 2015

WALL-E Tandem- Kaz Terada

To build the WALL-E tandem car, I used a standard size pine wood block and cut it into two cubes. I kept the original axle slots for mounting the wheels, and attached parts from a toy caterpillar with 1-1/4″ wheel cut-outs (made with poplar). Most of the other parts (head, neck and arms) were made of poplar. After completing the two identical WALL-E’s, I connected them with two dowels. Some weight was added to the back and bottom of each Wall-e. Since the two parts were connected together, there was an alignment problem so it wasn’t very fast. But it was a fun project!
Batmobile – Andy Holzer

Last summer Noah (my son) and I went to the MotorBooks car show, in Osceola Wisconsin. At the car show there was a replica of the Batmobile. While we were discussing the Batmobile he asked if it was possible to build a Batmobile for his pinewood car for next year. I love when he comes up with these ideas on his own so of course I said yes (not even thinking how hard it would be to create the Batmobile in pine).
The windshield is made from the top of a 500ml (16.5 fl. oz.) Aquafina bottle. The plastic is recessed into the body, via a knife cut line and attached with a small amount of glue.
During the racing I did not have a lot of time to view the races, but this year there was a lot of fast cars. When it came time for the awards Noah received 3rd place (technically 2nd for Webelos 1, as all Webelos raced together-10 racers total). This was the first year our pack gave out design awards (picked by all of the race spectators), and Noah received two – Coolest Looking Car & Best Painted and/or Decorated Car.
From Pinewood Derby Times Volume 8, Issue 12
Subscribe to this Free Pinewood Derby E-newsletter
(C)2015, Maximum Velocity, Inc. All rights reserved.
Maximum Velocity Pinewood Derby Car Plans and Supplies

Posted in Uncategorized.