Standard Stealth

MAXIMUM VELOCITY!^®

Standard Stealth

THE STEALTH has the lowest profile of any of our cars. At just 5/16" inch thick, THE STEALTH 'sneaks' down the track at top speed.

In addition to the car kit and basic hand tools, you will need the following supplies to build THE STEALTH:

1/4" (or larger) Brad Point or Forstner drill bit (hardware store item)

1/4" wood chisel

3.5 ounces of Segmented Lead (available from Maximum Velocity!)

Recommended but optional: 1/16" thick Basswood measuring 4" long (min.) x 1-1/2" wide (min.) - Available at most hobby and craft stores - The car can be completely built from the pine block, however, the use of the Basswood greatly simplifies creating the cover plate.

Drag Racer decal sheet and 1/16" black pin-striping was used to customize the car in the photo.

Customer Submitted Photos of the STEALTH

Mark & Joey Novak - 2007 Joe & Joey Papile - 2007