Standard Rod Pinewood Derby Car Design

MAXIMUM VELOCITY!^®

Standard Rod
Pinewood Derby Car Design

Taking its name from the Hot Rod (and of course from the Brass Rod), THE ROD will catch the eye of the spectators as it flies down the track.

In addition to the car kit and basic hand tools, you will need the following supplies to build THE ROD:

25/64" and 7/16" Brad Point or Forstner drill bit (hardware store item)
Access to a drill press
Shoe Rasp
Coping Saw
Pipe cutting tool
30 and 5 minute Epoxy
12" of 3/8" and 7/16" wooden dowels
Cotton Balls and Swabs (Drug store)
7" of 7/16" (.014 wall thickness) Brass Tubing (try www.maximum-hobby.com)
Small piece of colored paper (color similar or in contrast to paint job)
1/2" x 3" x .016" Brass Plate and Tin Snips (Hardware or hobby store)
Lead: 4-1/2" of 3/8" lead wire.
Lead: Small, non-removable split shot fishing weight (Sporting goods store)

Copyright © 2012 by Maximum Velocity, Inc.
Ž Maximum Velocity! is a registered trademark of Maximum Velocity, Inc.
Awana is a registered trademark of Awana Clubs International
Pinewood Derby is a registered trademark of Boy Scouts of America