THE COUPE is not only a bit of nostalgia, but is also a sleek machine that fights its way to the finish line.
In addition to the car kit and basic hand tools, you will need the following supplies to build THE COUPE:
13/32 inch (or larger) Brad Point Drill Bit
Coping Saw
Tundra Rod1 - 3 ounces
The windshield on this model was created with automobile striping. The body striping is 1/8 inch white pin striping.
1Maximum Velocity recommends Tundra Rod for weight. Lead Wire can be used instead of Tundra.
However, Lead is toxic if taken internally, so make sure to follow all safety precautions if you choose to use Lead Wire.
