By Randy Davis
Each pinewood derby season, there are always a few questions that get asked more than any others. Some years the questions are about weighting, while other years the questions are about alignment. But during the past season, there were two popular questions about lubricating with graphite. So let’s discuss these in detail.
Question 1: How do you get graphite to stick to the axles?
The short answer is, “You don’t want graphite to stick to the axles”, but let’s go a little deeper. Graphite is carbon in a unique molecular structure; the carbon atoms are formed into a layered structure. These layers allow the molecules to slide on each other, thus giving dry powered graphite a natural lubrication ability.
Dry graphite does not typically stick to metal or any non-porous surface. So, it does not stick to pinewood derby axles. However, it does stick to porous surfaces, specifically polystyrene, which is the plastic from which most pinewood derby wheels are made.
So, when lubricating pinewood derby wheels and axles, the graphite adheres to the inner bore of the wheel, and the axle slides on the graphite (and the graphite slides on itself). If the layer of graphite on the bore is sufficiently thick, then all contact between the metal axle and the plastic wheel is eliminated, resulting in a significant reduction in friction. Building this layer of graphite can be done in many ways, but all involve repeatedly adding graphite and rotating the wheel on the axle.(1)
There is a way to make graphite stick to an axle. This involves making a graphite paste by adding isopropyl alcohol. The axle is then dipped in the mixture and allowed to dry. Unfortunately, the resulting coating does not lubricate as well as dry graphite because the molecular structure is modified in the process. For this reason, Maximum Velocity does not offer graphite-coated axles. In all of our performance tests, graphite-coated axles were inferior to polished
Question 2: What do you think of that graphite packing video on YouTube?
There are a lot of videos about graphite packing. These can be divided into two categories: wet packing and dry packing.
Wet-packing involves making a graphite paste as described above. The axle is inserted into the wheel and the paste is pressed into the bore around the axle. After the graphite dries, the axle can be removed leaving a thick ring of hard graphite on the bore of the wheel.
There are two significant issues with this process:
1) There is no guarantee that the graphite ring is concentric with the bore of the wheel. In fact, it would take precision equipment to make a truly concentric ring (see Figure 1).
Figure 1 – Non-concentric Graphite Ring
In one video, after the ring is created the producer of the video spins the wheel on the axle. He states: “This wheel isn’t balanced at all; you can see how it wobbles.” Almost certainly, the real problem is not the wheel; the wobble is because the graphite ring is not concentric.
2) The ring does not lubricate as well as dry graphite. As described previously, in our testing, graphite with alcohol was always slower than dry graphite. In fact, if you watch the video mentioned above you will note that there is no comparison test between a dry-lubed and a wet-packed wheel/axle. In fact, there is no claim that the wet-packing method is effective other than “it might help you knock off a few thousandths of a second”.
Dry packing involves creating a ring of dry graphite in the bore of the wheel. As previously mentioned, it involves repeated applications of graphite, followed by spinning the wheels on the axles. The purpose of the spinning is to incrementally build up the graphite ring.
There are videos showing many ways to this. I am sure that many of the methods are effective, but I want to provide a few cautions.
1. Be leery of any method where the wheel is rotated at a high speed for an extended period of time. Many people advocate using a Dremel-like tool and a buffing wheel to rotate the wheel. Recognize that on a typical track, the average RPM of the wheel is about 2200. Dremel-like tools generally have settings as high as 30,000 RPM. If a wheel is spun up to 30,000 RPM, the graphite will wear off very quickly, and the wheel will overheat. Remember that the point of spinning is to build up the graphite ring, not wear it off.
So, if you use a Dremel-like tool to spin wheels, set the RPM to the lowest speed (on my tool this is still 5,000 RPM) and just briefly touch the wheel to the buffing wheel, letting it spin down to a standstill.
2. Some videos recommend using a treadmill to spin the wheels. That is, the lubed wheels and axles are installed on the car, the car is placed on a treadmill with a string from the front of the car attached to a stationary object so that the car stays on the treadmill. The treadmill is then started, and at intervals graphite is applied to the wheels.
Again, the wheel spinning is to build up the graphite, not wear it down. So if you use a treadmill, limit the runtime between graphite applications to about ten seconds. This simulates four heats on a standard track.
3. Some videos recommend pressing the graphite into the bore of the wheel (truly packing it). This is probably fine as long as the wheels/axles are spun many times to loosen up the system and shed the excess graphite. If this is not done, the wheels will not spin well.
At Maximum Velocity, we recommend spinning the wheels by hand before they are mounted on the car. This is a safe method, and a “tried and true” method. To make this method easier for kids (and their parents), you can make a simple tool to allow all four wheels to be spun at one time. This speeds up the process and minimizes the risk of dropping the wheels.
Figure 2 – Wheel Spinning Tool
(Not pretty, but it works)
I hope you found this information useful. I certainly didn’t mean to disparage any of the folks that post videos on YouTube. But recognize that like any information found on the Internet, it needs to be filtered with careful thought and good judgment.
(1) Our procedure for lubricating with Max-V-Lube Graphite can be found Here.
From Pinewood Derby Times Volume 14, Issue 9
(C)2015, Maximum Velocity, Inc. All rights reserved.