Pinewood Derby Memory – Ending on a High Note

When my son was a Bear in the Cub Scouts, we had just moved into the area and his pack was going to be having their annual Pinewood Derby Race. The year before, in his old pack, he and I built a car that took third overall and won the show and shine award for best paint job. So, we thought we could do well in the Pinewood Derby in his new pack; but we were wrong. When we went to weigh in his car that year I could tell right away that the cars in my son’s new pack – with the sleek designs and cool paint jobs – were on a totally different level than we were. In the double elimination race, my son’s car was eliminated in the first two heats. After that race I knew that we would have to do something different for next year.

The following year my son was in the Weblos group, and it would be his last year to race with the Cub Scouts in his new pack. After doing a little searching over the Internet, we designed a car that was sleek looking, and we  implemented some of the speed tips I was able to find.

My son, my wife, and I were all amazed and shocked when his car went undefeated that year in his pack, and was able to advance to the District race. We were further amazed when his car went undefeated in the area race and took second in the District for the Weblos that year. After the race we were informed that there was going to be a Council race that year, and the top two in District could go.

At the Council race there were some pretty fast looking cars, and we were not sure just how well his car would do. However we were both surprised, because at the end of the race he had finished second in the Weblos just behind the same car he came in second to at the district race.

The best part was after they had awarded him his trophy (which was a big one), he had to walk back to the car which was located at the opposite end of the fair grounds through the thousands of scouts that were there. I could tell that he was on cloud nine because the whole way across the fair grounds he was stopped by friends and other scouts that wanted to check out his car and his trophy, and he was glad to share his story with them.

Brent Asper

From Pinewood Derby Times Volume 5, Issue 3

Subscribe to this Free Pinewood Derby E-newsletter

(C)2012, Maximum Velocity, Inc. All rights reserved.

Maximum Velocity Pinewood Derby Car Plans and Supplies

Pinewood Derby Car Showcase – September 24, 2012


Sparky – Bill & Matt Archer

My 8-year-old Bear Cub Scout son Matt asked me the other day before the races, “You know what’s the best part of Pinewood Derby racing Dad?”

I said, “What Matt?”

“Teamwork”, he said.

He’s right. He was there to help develop the design, draw the car, and dream with me through the details of tricks we used to make a fast car. I explained every detail of our construction process so that he knows why we polish the axles, why we need a sleek aerodynamically clean design, why we need the weight back in the back, why we run on three wheels, etc. Our pack passed out rule sheets in advance stating what could and couldn’t be done. We chose to limit our modifications to stay in the scout class with original wheelbase, length, and width, and limited wheel/axle work.

When Matt took the car to inspection, the judge said he would have to be in the modified class. When asked why, he stated that it was too long. Matt was on the ball saying that, “No, it was only 7 inches.” Then the judge said he still would have to be in the modified class because the wheelbase was altered. I told the judge those were the
original slots cut in the block, we just cut off the back of the block and lengthened the front. The rules didn’t state any restrictions on this. He finally conceded and let Matt run in the scout division. When they asked Matt what the name of the car was, he said “Sparky.”

Sparky went on to an undefeated season setting track records at the pack and district races, and taking second in best of show at district. Even modified division cars couldn’t catch Sparky. Overall Sparky earned five trophies.

Drag Star – Bob Johnson

With graphite splatter still on the body, this car took 2nd Place at a Girl Scout event, and then took 1st Place at an adult race. The body was first sawed out, then hand filed and sanded. The weight is set at 80 percent on the rear axles and 20 percent on the front axles. My wife thought I was nuts to spend so much time on the car.

F-18 – Andy Garza

Here is the car that my son and I made last year. My oldest sons are both at the Naval Academy and desire to be pilots. So we decided to honor them with this Navy F-18 Blue Angel theme car. We used a pre-formed block, made some shape modifications, and confiscated some parts from a Revell model kit. An automotive paint job was then
applied, and the results were fantastic. Not only is this car a looker, but it is fast as well. My son won 2nd in the Pack meet, 2nd in the District, and 2nd in the Council. Perhaps if the afterburners worked, we might have gotten a 1st Place somewhere in there!

From Pinewood Derby Times Volume 5, Issue 3

Subscribe to this Free Pinewood Derby E-newsletter

(C)2012, Maximum Velocity, Inc. All rights reserved.

Maximum Velocity Pinewood Derby Car Plans and Supplies

The Dark Side: eBay Cars

As you know eBay has become quite a powerhouse in on-line retailing. At this site you can purchase virtually anything. I personally use eBay for selling a few things, but many pinewood derby vendors use eBay as their primary retail outlet.

In most cases this is great for the pinewood derby community, as it allows many unique products to become available to the pinewood derby shopper. As always, buyer beware is still mandated, but generally you can find quality products at good prices.

But as is often the case, there is a dark side – the selling of completed cars.(1) Generally these cars are marketed to the parent as a “guaranteed district winner”, or a “super fast car to give you the edge”. Some have professional paint jobs, others are (supposedly) designed by people with PhDs in physics, and a few look like they were built in a model shop.

To the over-busy and over-achieving parent, these cars are seductive. “All I have to do is pull out the plastic, and my child will win a trophy”, the thinking goes. “Why ‘waste’ time making a second rate car when I can buy a winner.”

As I will share below, I have issues with this thought process. I doubt that I will convince those of you that have taken part in the dark side, but hopefully I can persuade those on the fence to reconsider.

But first I do want to mention that there is one legitimate reason for buying a completed car. That is, to add a car to a collection. Sometimes beautiful, vintage cars are sold on eBay. They are not legal for a race (obsolete kit type), but they certainly would make a nice addition to a collection. Also, some cars made from modern kits are sold that are so nice that I can see someone buying them to put on
a shelf. But these offerings are few and far between during the madness of pinewood derby season.


When I decide what products to offer, and in all of my writings and interaction with people I try to promote two philosophies:

1. “Do your best” – That is, do everything you can within the rules to build the fastest car possible. Learn, then work smart and work hard to achieve the goal.

2. “Parent-child project” – Make sure that the child takes part in all aspects of building the car. Clearly the amount of participation will vary from age to age, and from child to child. But the intent is for the child to have ownership of the project and of the completed car.

These philosophies are in harmony with the intent of the pinewood derby as espoused by the various clubs and organizations that sponsor these races. Following these philosophies may involve learning about physics, mechanics, and wood-working. It may involve purchasing some products. But fundamentally, the rules are followed, a car is built, and the child is fully involved.


Purchasing a completed car necessitates belief in a different philosophy, that is, “Win at all cost”. In other words, “I don’t care if the rules are broken(2), I don’t care if my child is involved, I just want him/her (me) to get a trophy.” Admittedly, this philosophy seems to prevail in much of corporate America these days, but nevertheless it is contrary to the basic intent of pinewood derby racing, and is ultimately destructive. This philosophy teaches our children that:

1. Cheating is okay if you are not caught,

2. Money gives me the power to win,

3. Hard work is not necessary to succeed.

Do these sound familiar? Certainly some top executives in America’s corporations follow these philosophies. But now many – as they await trial or reside in prisons – have discovered that these philosophies are ultimately destructive.

These philosophies are the direct opposite of what I believe we should teach our children. They will eventually discover that these philosophies exist and are practiced by some. But I believe that a solid ethical foundation and a “do your best” philosophy will ultimately pay off.


In addition to teaching the wrong philosophy, the purchase of a completed car (instead of building the car) also demonstrates the wrong priority to our children. Earlier I stated, “Why ‘waste’ time making a second rate car when I can buy a winner.” Clearly, spending time with your child is never a “waste” of time. Children will always remember time spent with their parents, while the memory of a
particular trophy win will in itself wane. Our kids crave time with us. They want to be with their parents (well, at least until they become a teenager). Yet we are often “too busy” to spend time with them. By purchasing a pre-built car, we are essentially telling our child, “I don’t have time to spend with you, so instead I will buy you something.” Is this the message you really want to send?


One valid concern that is often raised by parents is: “We worked hard and did our best, but the car wasn’t competitive and my child was heartbroken. In our case, ‘do your best’ didn’t work out.” My response is that this perspective is too short-term. People commonly do not succeed on their first attempt. Could you ride a bicycle the first time you tried? Did Nolan Ryan throw a no-hitter the first time out? Did Thomas Edison invent the light bulb on the first try? (It took him over 1,000 attempts.) Do all businesses succeed? (Over 50 percent fail in the first year, and the vast majority within five years). One of the chief ways we learn is through failure. It is oftentimes failure that gives us the motivation to learn more, to try a different method, to work harder, and to work smarter. On a personal note, I had two business failures before starting Maximum Velocity, and it was failure in one of our early pinewood derby races that initiated my effort to learn more about making fast cars.

So, what do you do if you did you best building a car, but it wasn’t good enough? Get on the Internet and learn. Information can be found for free, or purchased for a few bucks. If you have the desire and budget, get a few tools. But the main thing is use the “failure”(3) as the motivation to do better, not to give up or give in to the dark side.

Another concern voiced by parents is that they have no equipment to build a car. There are several solutions to this dilemma including asking a neighbor to help, purchasing a pre-cut kit, some components, or some tools, or making use of workshops sponsored by the organization. Don’t use this as an excuse to take the big shortcut.

There are other dilemmas as well, but I don’t believe any of them justify purchasing a completed car.


Ultimately we want what is best for our children. To me, this involves teaching our children to be ethical and to strive to do their best. But we can easily get sidetracked, and try to take shortcuts to success. When we do this, we teach our kids that the goal is more important than the path taken. I encourage you to make sure that you put your kids on the right path and stay away from the shortcuts.
Don’t succumb to the temptation to buy a victory, as it will ultimately leave a bitter taste.

(1) Although it was not my intention, this article will likely offend some of you who sell completed cars on eBay. I hope that you will at least consider my concerns, and then reconsider your product offering. Instead of selling completed cars, how about car kits? With kits, the parent/child team will put some effort into building the car.

(2) Virtually all rule-sets state in one manner or another that a car must be built by the parent-child team.

(3) Failure relates only to the race standings. Any time spent with your child is not a failure.

From Pinewood Derby Times Volume 5, Issue 3

Subscribe to this Free Pinewood Derby E-newsletter

(C)2012, Maximum Velocity, Inc. All rights reserved.

Maximum Velocity Pinewood Derby Car Plans and Supplies

Pinewood Derby Memory – Perseverance

My son Alex worked very hard on his car. I tried to help as best as I could but being a single mom and not that talented with power tools, I prayed a lot. His design was a nice race car shape we found on your site. It seemed simple enough until the band saw had a mind of its own. In one fell swoop the nice race car shape became a wedge. I was a little worried, but after reading the hints on your site it seemed like it might have all happened for a reason.

I then drilled the weight holes on the bottom and broke the first cardinal rule; I went right through the body. Again I was a little worried but it looked like a logical place for the racer’s head! I handed over the car and Alex set to work sanding, priming, sanding again. We made a windshield from a plastic soda bottle and he painted the final coat.

Now it was time to weigh the car; it came in at 1.5 ounces! I guess I cut off more of the block than I realized. Panic set in. I scrounged up some flat metal and asked my brother to take them to work to be cut in the machine shop. The original idea of fishing weights nearly caused us to fall over with laughter – with a car at 1.5 ounces it was going to take more weights than car.

Then after the final finish coat of clear acrylic the car fell and split in front. A little glue, some clamps and a few prayers got us back on track. We got the car up to weight, 4.97 ounces, and Alex had to repaint. Thinking that I had totally ruined my son’s first Pinewood Derby, we set off to the pack race. He was so excited when his car finished a full two car lengths ahead of the other Tigers. In all he took 1st Place in his Den, and he then raced the bigger boys and took 4th overall in the Pack. We celebrated with plastic stemware and ginger ale (champagne substitute)! Alex then raced at the Districts, and finished 21 out of 88 racers.

We had a good time building together and I learned it does not matter that I am a single mom. We can still do ‘guy’ things together and have good results. Alex learned that it does not matter if he won or lost but that he did his best and that we can count on each other to get things done.

Susan Hanna
Proud mom of Tiger cub Alex Hanna
Cub pack 41, Johnsonsville, Pennsylvania

From Pinewood Derby Times Volume 5, Issue 2

Subscribe to this Free Pinewood Derby E-newsletter

(C)2012, Maximum Velocity, Inc. All rights reserved.

Maximum Velocity Pinewood Derby Car Plans and Supplies

End of Summer New Products

Dear Pinewood Derby Fans,

Fall is in the air and the smell of pine can be found in many garages around the country. Here at Maximum Velocity, we are excited to share our new pinewood derby products with you. You can see all of our new products by clicking on this link:

Here are a few highlights:

– New Car Kits – We have introduced two new car kits, the Low-Rider GT, and a new and faster version of our popular Propeller Car.

– Axles – A non-grooved version of our Super Speed Axles and a Needle Axle Upgrade Kit are available to give you a serious performance boost.

– Diamond Polish – Put an extra fine shine on your axles with our Diamond Polish.

We have several other new products as well including:
o New Decals
o Sanding Supplies
o Low-priced Zinc Underbody Weights.

You can see all of our new products at:

== A Gift For You ==
To thank you for your continued patronage, we have some specials on our new products just for you. This includes a complimentary set of plastic car parts. To receive this gift, please add the car parts to your shopping cart at:

In addition to the gift and special offers, you can get 10% off on your next order. Just use coupon code 11SEP10PERCENT on the final checkout page. This offer is good through September 21, 2012.

== Inventory Clearance ==
We also are clearing inventory on several items including car kits and car plan booklets, and pine blocks. Click here to find our clearance items:

As always if we can help in any way, please contact us by e-mail at:

Best wishes to you and your family for a great pinewood derby racing

With best regards,
Randy Davis
Maximum Velocity – Give Your Car The Racer’s Edge!

Pinewood Derby Car Showcase – September 7, 2012


Pat & Bob – Joseph Toepert

This is my son Joseph’s 2005 Pinewood Derby Car. The inspiration started in November of 2004 when we saw a ‘Patrick’ ornament at a local store. The ornament had Patrick riding a snow sled. We removed the sled and Patrick turned out to be the perfect size and weight. The build was easy as it just required one cut and some sanding. The painting took several days due to the numerous colors. He receivedthe award for “Best Car That’s Not A Car” at the pack Pinewood Derby. It shows how you can think outside the box for some good ideas.

Snake – Mike Sullivan

This is a design that my son Michael sketched out. The car was made from an original BSA kit, We worked closely together, teaching him to use the coping saw, rasp, sand paper, and paint. Michael’s car was the fastest in the Pack, by a long shot. It weighed in at 5 ounces utilizing your tungsten cylinders. We trued the wheels, and cleaned the axles with pumice. NyOil II removed that last little bit of friction. Seeing my son so proud of his work and accomplishments is a moment sealed in time and memory!

Ski-Doo – Monty Getz

This is a picture of my daughter Ashley’s car. It took 1st Place in speed. It has an extended wheel base with axle holes and one wheel raised. The wheels are H-cut. The holes you see on the top are tapped, and I used set screws to hold the axles in place. The holes go all the way through, with wax paper shims underneath on the axle for wheel alignment. On the rear is a larger tapped hole with a polished brass plug that can be removed for weight adjustment.

From Pinewood Derby Times Volume 5, Issue 2

Subscribe to this Free Pinewood Derby E-newsletter

(C)2012, Maximum Velocity, Inc. All rights reserved.

Maximum Velocity Pinewood Derby Car Plans and Supplies

The Pinewood Derby Prayer

After I read your newsletter that was forwarded to me by a friend, I felt a need to share a special Pinewood Derby moment in my oldest son’s life. When my son was a Webelos II in Pack 169 in Egham, England, our Cubmaster, Glenn Brace, wrote a Pinewood Derby poem that he read prior to our Derby race. I feel the poem says it all.

The Pinewood Derby Prayer

Hey God, we ask you to draw near
And bless the boys who gather here.
This is the day they’ve waited for
Their blocks of wood are blocks no more.
Plastic wheels and dime store nails
Become the stuff of sporting tales
Of finishes too close to see!
You’re here for every victory.

You bless the winners in their joy
But there’s another kind of boy
Whose handiwork is blessed by you
Because his hands tried something new.
You smile upon the crooked wheel,
The paint job done with boyish zeal,
The splintered car, the sloppy glue.
You love the work that Your sons do.

But there is one here in this place
Who shows the greatness of Your grace.
He is the boy who hasn’t won
But when he hears the starting gun
He’s there to cheer his fellow scouts
His are the loudest victory shouts.
And when his brothers haven’t won,
He’s just the one to say “well done,
You’ve tried your best and you’ve had fun,
There are more races to be run.”

And so, dear God, we hear you say
Upon this happy Derby Day,
“Remember, whether best or worst,
Remember, you are brothers first.”

Glenn Brace
Cubmaster, Pack 169

Submitted by:

Pam Pender
Tiger Den Leader, Pack 52
Troop Committee Member, Troop 52
Morgantown, West Virginia

From Pinewood Derby Times Volume 5, Issue 1

Subscribe to this Free Pinewood Derby E-newsletter

(C)2012, Maximum Velocity, Inc. All rights reserved.

Maximum Velocity Pinewood Derby Car Plans and Supplies