Triangular Tungsten Canopy - 2.5 ounces
Pinewood Derby Weight

These Triangular Tungsten Canopies make it easy to add 2.5 ounces to your car, and at the same time will give your car a special look,

Each canopy weighs 2.5 ounces, is nickel, gold, or black in color, and measures:
  • Thickness (not including mounting stud): 3/8 inch

  • Length: just over 1-5/8 inches

  • Width: just over 1-1/8 inches

  • Mounting Stud Diameter: just under 1/2 inch

  • Mounting Stud Length: just over 1/4 inches

The Triangular Tungsten Canopy can be easily used for pinewood derby car weighting if the weight of the car body, wheels, and axles is less than 2.5 ounces. Drill a 1/2 inch diameter hole into the top of the car body (generally the hole is drilled all the way through the car). Apply epoxy in the hole, and spread just a little epoxy on the top of the car as well. Mount the canopy and allow it to dry.

Since the Tungsten Canopy is very hard, do not plan to drill out any extra weight. Instead, use an alternate method to make fine adjustments such as adding/removing tungsten putty, beads, etc.

a2.5 ounce nominal weight - actual weight ranges from 2.45 to 2.5 ounces

Copyright © 2016 by Maximum Velocity, Inc.
Maximum Velocity! is a registered trademark of Maximum Velocity, Inc.
Awana is a registered trademark of Awana Clubs International
Pinewood Derby is a registered trademark of Boy Scouts of America
PineCar is a registered trademark of PineCar