The ANNIHILATOR is very low, sleek, fast, and very aggressively weighted (1-2/3 ounces of weight are located behind the rear axle). When aligned for Rail-Riding (recommended), the Annihilator soars down the track, eliminating the competition.
In addition to the car kit and basic hand tools, you will need the following supplies to build THE ANNIHILATOR:
1/4 inch Tungsten Bars (Available from Maximum Velocity)
3/16 inch Tungsten Cubes (Available at Maximum Velocity)
1/4 inch Brad Point or Forstner drill bit
1/4 inch wood chisel
The car in the photo sports lacquer paint with yellow pinstriping, a Maximum Velocity decal, and custom lettering.