MAXIMUM VELOCITY! ®

Flat Tundra - Tungsten Composite - 3.0 ouncesa
Pinewood Derby Weight



Flat Tundra

What is Tundra?

Flat Tundra is formulated with tungsten to provide the same density as lead, but at a lower cost than tungsten itself. Flat Tundra is non-toxic, and can be easily cut, drilled or sanded to shape. You can substitute Flat Tundra for segmented lead in any of our car plans that specify segmented lead.

How to Use this Product

Flat Tundra is formed into rectangles, measuring 1-1/16 inch long, 1/2 inch wide, and just over 1/8 inch thick (same as segmented lead), and weighing 1/2 ounce. Your 3.0 ounce shipment will contain six pieces of Flat Tundra.

Typically, a rectangular pocket is made in the bottom of the car (with a drill bit, then with a wood chisel - see example below), and the Flat Tundra is glued into the pocket - epoxy or hot glue adhesive is recommended. The Flat Tundra can be cut with any cutting pliers. It can be also be drilled if needed.

Flat Tundra Example

a3 ounces nominal weight. Actual weight can vary from 2.9 to 3.0 ounces.




Copyright © 2016 by Maximum Velocity, Inc.
Maximum Velocity! is a registered trademark of Maximum Velocity, Inc.
Awana is a registered trademark of Awana Clubs International
Pinewood Derby is a registered trademark of Boy Scouts of America
PineCar is a registered trademark of PineCar