MAXIMUM VELOCITY! ®

Polished
BSA Pinewood Derby Speed Axles





Say "Goodbye" to burrs, crimp marks, and polishing! These BSA Pinewood Derby Speed Axles are precision-made to replicate the official BSA nail, but without the burrs and crimp marks. They are polished to 3,000 grit.1 Just lube and race.

Benefits
Usage

Gently wipe off the axles with a soft cloth, then lubricate with good quality graphite (we recommend Max-V-Lube) or with Krytox 100.

Technical Information
Shaft Diameter:   0.087 inch ± 0.0005   (BSA:   0.088 ± 0.002)

Shaft Length:   1 inch   (same as BSA)

Material:   Zinc-coated steel   (same as BSA)
1Three-thousand grit polishing produces an axle that is generally shiny to the eye, however, this polishing level does not produce a mirror finish. Fine polish lines will be seen under magnification.



Copyright © 2016 by Maximum Velocity, Inc.
Maximum Velocity! is a registered trademark of Maximum Velocity, Inc.
Awana is a registered trademark of Awana Clubs International
Pinewood Derby is a registered trademark of Boy Scouts of America
PineCar is a registered trademark of PineCar