MAXIMUM VELOCITY! ®
Extended Wedge Turbo

THE WEDGE TURBO adds a racy twist to the classic wedge design. With ease of building and top performance, THE WEDGE TURBO is a great choice for new builders.
In addition to the car kit and basic hand tools, you will need the following supplies to build THE WEDGE TURBO:
- 3/8" or 25/64" Brad Point or Forstner drill bit (hardware store item)
- Coping saw or another type of fine saw
- Tungsten: 2-1/2 ounces of tungsten cylinders (available from Maximum Velocity!)
- Lead: 1/2 ounce of 3/8" lead wire (available from Maximum Velocity!). I will include the lead wire at no charge if when ordering the tungsten cylinders the following statement is placed in the comment field of the order form: "I am building the Extended Wedge Turbo - please include the lead wire at no charge."
- 6" of 3/8" dowel rod
- 1/16" gold pin-striping was used to customize the car in the photo
- The extended wheel base can be created by either cutting new axle slots with two hacksaw blades, or by drilling axle holes with the Pro-Body Tool. Instructions and templates are provided in the Car Plans 3 booklet.
Customer Submitted Photos of the WEDGE TURBO
Steven Goetz - 2004
Copyright © 2008 by Maximum Velocity