Extended Predator Pinewood Derby Car Design

MAXIMUM VELOCITY!^®

Extended Predator
Pinewood Derby Car Design

THE PREDATOR is low, sleek, and curvy. At just 5/16 inch thick, THE PREDATOR easily streaks down the track, producing top results. To get a feel for the dimensions of this car, the yellow pinstriping on the car is 1/8 and 1/4 inch in width.

In addition to the car kit and basic hand tools, you will need the following supplies to build THE PREDATOR:

1/2 and 1/4 inch Brad Point or Forstner drill bits (hardware store item)
3.5 ounce Tungsten Canopy (available from Maximum Velocity!)
Twelve, 3/16 inch Tungsten Cubes (available from Maximum Velocity!)
1/8 and 1/4 inch yellow pinstriping was used to customize the car in the photo (available from Maximum Velocity!).

Copyright © 2012 by Maximum Velocity, Inc.
Ž Maximum Velocity! is a registered trademark of Maximum Velocity, Inc.
Awana is a registered trademark of Awana Clubs International
Pinewood Derby is a registered trademark of Boy Scouts of America